News

Octoplus Huawei Tool v.1.2.1 is out! Added support for Huawei devices based on Kirin CPU's.

2020-09-09 17:27:33

Octoplus Huawei Tool v.1.2.1 is out!

Octoplus Huawei Tool v.1.2.1 Release Notes:

  • Added support for Huawei devices based on the following CPU's:
    • Kirin 710, Kirin 810, Kirin 980, Kirin 990, Kirin 990 5G
  • All operations are supported via Software TESTPOINT feature.
    Software TESTPOINT feature allows to put the device into Factory Mode without disassembling the phone! (use "On/Off Factory Mode" option in Software).

  • List of supported operations:
    • On/Off factory mode (you don't need to disassemble the phone)
    • Reset FRP
    • Reset Huawei ID
    • Direct Unlock*
    • Read Cert
    • Write Cert*
    • Repair Product name/ Vendor/ Country
    • Wriite Firmware via Factrory Mode (Update.app firmware)
    • Write Board Firmware (supported Board firmwares only from Octoplus Support Area)
    • Read Backup
    • Write Backup
  • Note: * credit based operation (requires Octoplus credits to proceed this operation), for more detail, please check Credits Consumption


  • Added "On/Off Factory Mode" feature (to put the device into Factory Mode (HUAWEI USB COM 1.0) without Test Point) for models based on the following CPU's:
    • Kirin 650
    • Kirin 655
    • Kirin 659
    • Kirin 950
    • Kirin 955
    • Kirin 960
    • Kirin 970

  • Added Direct Unlock operation (devices with old security are supported via FastBoot Mode) via Test Point for models based on the following CPU's:
    • Kirin 650
    • Kirin 655
    • Kirin 659 (thanks to Mr. Khalfan12)
    • Kirin 950
    • Kirin 955
    • Kirin 960
    • Kirin 970

Download Octoplus Huawei Tool v.1.2.1