News

Octopus Suite v.1.5.7 is out! Added Read Codes via server for Galaxy S9/S9+ based on Exynos CPUs and more!

2018-08-09 18:18:17

Octoplus/Octopus Suite v.1.5.7 is out! Added Read Codes via server for Galaxy S9/S9+ based on Exynos CPUs and more!

Added Read Codes (via server) for Samsung Galaxy S9, S9+, A6 2018, J4, J6 2018 series based on Exynos CPUs.

Added new additional Read Codes (via server) method for latest Exynos CPUs-based devices: S8/S8+, Note 8, A8/A8+ 2018, A3/A5/A7 2017, J7 2017/Nxt/Prime series.

Octoplus/Octopus Suite v.1.5.7 Release Notes:

  • Added support for the following models:
    • SM-G960F - added Read Codes (via server)
    • SM-G960N - added Read Codes (via server)
    • SM-G965F - added Read Codes (via server)
    • SM-G965N - added Read Codes (via server)

    • SM-A600F - added Read Codes (via server)
    • SM-A600FN - added Read Codes (via server)
    • SM-A600G - added Read Codes (via server)
    • SM-A600GN - added Read Codes (via server)
    • SM-A600N - added Read Codes (via server)

    • SM-J400F - added Read Codes (via server)
    • SM-J400G - added Read Codes (via server)
    • SM-J400M - added Read Codes (via server)

    • SM-J600F - added Read Codes (via server)
    • SM-J600FN - added Read Codes (via server)
    • SM-J600G - added Read Codes (via server)
    • SM-J600GF - added Read Codes (via server)
    • SM-J600GT - added Read Codes (via server)
    • SM-J600L - added Read Codes (via server)
    • SM-J600N - added Read Codes (via server)

  • Added new additional Read Codes (via server) method for the following Exynos CPU-based devices (all firmwares and KNOX are supported, no root required):
    • SM-A320F, SM-A320FL, SM-A320Y
    • SM-A520F, SM-A520K, SM-A520L, SM-A520S, SM-A520W
    • SM-A530F, SM-A530N, SM-A530W
    • SM-A720F
    • SM-A730F, SM-A730N
    • SM-G950F, SM-G950FD, SM-G950N, SM-G955F, SM-G955FD, SM-G955N
    • SM-J530F, SM-J530FM, SM-J530G, SM-J530GM, SM-J530K, SM-J530L, SM-J530Y, SM-J530YM
    • SM-J730F, SM-J730FM, SM-J730G, SM-J730GM, SM-J730K
    • SM-N950F, SM-N950FD, SM-N950N
  • Note: Read Codes (via server) operation for all mentioned above devices works for most available device firmwares (modems). If your device has unsupported modem, just write another available firmware or proper supported modem. Or wait a few hours and try to repeat the operation again - support for unsupported modem firmware will be added to server automatically during a few hours.

  • Added new additional Read Codes method for SM-G950x and SM-G955x, based on Qualcomm CPUs. From now on, two Read Codes methods are supported - Read Codes (Via DIAG port) and Read Codes (Via ADB interface). If Read Codes operation was unsuccessful by using the first method, try to perform it using the second Read Codes method.

  • Latest information is available here.

    You can buy Octopus/Octoplus Server Credits from your local reseller or directly here.

    How to perform "Read Codes" operation:

    • Select proper model from the list in the Software
    • Install Samsung ADB drivers
    • Connect the device to PC via USB cable
    • Enable ADB
    • Press "Read Codes" button

Download Octoplus/Octopus Suite v.1.5.7