Octoplus / Octopus Box LG Software v.2.4.5 is out!
We have added world's first support for LG Stylus 2, X Style, LG Stylo 2, additional support for LG Nexus 5x, K10 and more!
Octoplus/Octopus Box LG Software version 2.4.5 Release Notes:
- Added support for the following models:
- F720K - added world's first Direct Unlock, Repair IMEI, Read/Write NVM, Read/Write QCN, Read/Write/Reset Security, Read Full Flash, Repair BT Address, Repair Wi-Fi MAC Address.
- F720L - added world's first Direct Unlock, Repair IMEI, Read/Write NVM, Read/Write QCN, Read/Write/Reset Security, Read Full Flash, Repair BT Address, Repair Wi-Fi MAC Address.
- F720S - added world's first Direct Unlock, Repair IMEI, Read/Write NVM, Read/Write QCN, Read/Write/Reset Security, Read Full Flash, Repair BT Address, Repair Wi-Fi MAC Address.
- K200MT - added world's first Direct Unlock, Repair IMEI, Read/Write NVM, Read/Write QCN, Read/Write/Reset Security, Read Full Flash, Repair BT Address, Repair Wi-Fi MAC Address, Reset FRP (thanks to mr.Beto251172).
- K540 - added world's first Direct Unlock, Repair IMEI, Read/Write NVM, Read/Write QCN, Read/Write/Reset Security, Read Full Flash, Repair BT Address, Repair Wi-Fi MAC Address, Reset FRP (thanks to mr.Techsky).
- MS550 - added world's first Repair IMEI, Read/Write NVM, Read/Write QCN, Read/Write Security, Read Full Flash, Repair BT Address, Repair Wi-Fi MAC Address (thanks to mr.Techsky).
- K530 - added Repair IMEI (A/B), Direct Unlock, Read/Write NVM, Read/Write QCN, Read/Write/Reset Security, Read Full Flash, Repair BT Address, Repair Wi-Fi MAC Address, Reset FRP.
- K530AR - added Repair IMEI (A/B), Direct Unlock, Read/Write NVM, Read/Write QCN, Read/Write/Reset Security, Read Full Flash, Repair BT Address, Repair Wi-Fi MAC Address, Reset FRP.
- K530DY - added Repair IMEI (A/B), Direct Unlock, Read/Write NVM, Read/Write QCN, Read/Write/Reset Security, Read Full Flash, Repair BT Address, Repair Wi-Fi MAC Address, Reset FRP.
- K530F - added Repair IMEI (A/B), Direct Unlock, Read/Write NVM, Read/Write QCN, Read/Write/Reset Security, Read Full Flash, Repair BT Address, Repair Wi-Fi MAC Address, Reset FRP (thanks to mr.Ali1803).
- K530TR - added Repair IMEI (A/B), Direct Unlock, Read/Write NVM, Read/Write QCN, Read/Write/Reset Security, Read Full Flash, Repair BT Address, Repair Wi-Fi MAC Address, Reset FRP.
- D851 - added world's first deactivate (McAfee) Kill Switch.
- D851TN - added world's first deactivate (McAfee) Kill Switch.
- D851WH - added world's first deactivate (McAfee) Kill Switch.
- H790 - added Reset FRP (thanks to mr. Bah300), Write Firmware.
- H790T - added Reset FRP (thanks to mr. Bah300), Write Firmware.
- H791 - added Reset FRP (thanks to mr. Bah300), Write Firmware.
- H791F - added Reset FRP (thanks to mr. Bah300), Write Firmware.
- K410 - added Write Firmware.
- K410A - added Write Firmware.
- K410F - added Write Firmware.
- K410G - added Write Firmware.
- All supported operations are described in details in Software manual ("Cable & Manual" button in Software).
In order to perform "Deactivate Kill Switch" operation you need to do the following:
- Attach testpoint as shown on figure in manual and connect the phone with micro-USB cable (don't use USB hubs!). For some Firmwares to put the phone into "Qualcomm-Mode" you can try to do the next: press and hold "Vol+" button and connect the phone directly to PC via micro-USB cable.
- Check PC Device Manager, a new device should appear: "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn't installed a driver. Drivers are available in Installation Folder.
- Release testpoint and press "Deactivate Kill Switch" button.
- Follow Software instructions (prompts).