Octopus Box LG Software v.2.2.3 is out! We have added world's first support for different models of LG K4 and more!
Octoplus / Octopus Box LG Software v.2.2.3 is out!
We have added world's first support for different models of LG K4 and support for other phones!
Octoplus / Octopus Box LG Software v.2.2.3 Release Notes:
- Added support for the following models:
- K120AR - added world's first Direct Unlock, Read Codes, Repair IMEI, Read/Write/Repair EEPROM, Read Full Flash, Repair BT Address, Repair Wi-Fi MAC Address, Read phone's Info
- K120E - added world's first Direct Unlock, Read Codes, Repair IMEI, Read/Write/Repair EEPROM, Read Full Flash, Repair BT Address, Repair Wi-Fi MAC Address, Read phone's Info
- K120F - added world's first Direct Unlock, Read Codes, Repair IMEI, Read/Write/Repair EEPROM, Read Full Flash, Repair BT Address, Repair Wi-Fi MAC Address, Read phone's Info
- K120GT - added world's first Direct Unlock, Read Codes, Repair IMEI, Read/Write/Repair EEPROM, Read Full Flash, Repair BT Address, Repair Wi-Fi MAC Address, Read phone's Info
- K120H - added world's first Direct Unlock, Read Codes, Repair IMEI, Read/Write/Repair EEPROM, Read Full Flash, Repair BT Address, Repair Wi-Fi MAC Address, Read phone's Info
- K130 - added world's first Direct Unlock, Read Codes, Repair IMEI (A/B), Read/Write EEPROM, Read Full Flash, Repair BT Address, Repair Wi-Fi MAC Address, Read phone's Info
- K130E - added world's first Direct Unlock, Read Codes, Repair IMEI (A/B), Read/Write EEPROM, Read Full Flash, Repair BT Address, Repair Wi-Fi MAC Address, Read phone's Info
- Added Reset Security operation for the following models:
- D320, D320AG, D320AR, D320F, D320F8, D320G8, D320J8, D320N, D320TR
- Added Deactivate (McAfee) Kill Switch * operation for the following models:
- LS990
- VS985, VS985DU, VS985WDU
- All supported operations described in details in the manual ("Cable & Manual" button in software).
* In order to perform "Deactivate Kill Switch" operation, you need to do the following:
- Attach testpoint as shown on figure in manual, and connect phone with Micro USB cable (don't use USB hubs!).
For some firmware versions, to put the phone into "Qualcomm-Mode", you can try to do the next: press and hold "Vol+" button and connect the phone directly to PC via micro USB cable - Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn't installed a driver. Drivers are available in Installation Folder
- Release testpoint and press "Deactivate Kill Switch" button
- Follow Software instructions (prompts)