News

Octopus Box LG Software v.2.2.1 is out! We have added world's first support for different models of LG Max and for LG K7!

2016-03-03 19:29:32

Octoplus / Octopus Box LG Software v.2.2.1 is out!

We have added world's first support for different models of LG Max and for LG K7!

Octoplus / Octopus Box LG Software v.2.2.1 Release Notes:

  • Added support for the following models:
    • X155 - added world's first Direct Unlock, Read Codes, Repair IMEI (A / B), Read phone's Info
    • X160 - added world's first Direct Unlock, Read Codes, Repair IMEI (A / B), Read phone's Info
    • X165 - added world's first Direct Unlock, Read Codes, Repair IMEI, Read phone's Info
    • X165G - added world's first Direct Unlock, Read Codes, Repair IMEI, Read phone's Info
    • MS330 - added world's first Repair IMEI, Repair BT Address, Repair Wi-Fi Address, Read / Write / Repair NVM, Read / Write QCN, Read Security, Write Security Backup, Read Full Flash
  • Added Deactivate (McAfee) Kill Switch* operation for the following models:
    • F400K, F400L, F400S (thanks to Mr. salman.wifi)
  • Fixed "Incompatible model ID" issues for LG AS323.
  • All supported operations described in details in the manual ("Cable & Manual" button in software).

* In order to perform "Deactivate Kill Switch" operation, you need to do the following:

  1. Attach testpoint as shown on figure in manual, and connect phone with Micro USB cable (don't use USB hubs!).
    For some firmware versions, to put the phone into "Qualcomm-Mode", you can try to do the next: press and hold "Vol+" button and connect the phone directly to PC via micro USB cable
  2. Check PC Device Manager, a new device should appear "Qualcomm HS-USB QDLoader 9008" or "Unknown Device" if you hadn't installed a driver. Drivers are available in Installation Folder
  3. Release testpoint and press "Deactivate Kill Switch" button
  4. Follow Software instructions (prompts)

Download Octoplus / Octopus Box LG Software v.2.2.1