Octoplus/Octopus Box Samsung Software v1.5.3 is out! Added support for Samsung SM-N900A, SM-N900T, SM-N9005, SM-N900W8
Octoplus/Octopus Box Samsung Software v1.5.3 is out! Added partial support for Samsung SM-N900A, SM-N900T, SM-N9005, SM-N900W8, additional support for GT-E2250, GT-E2252, GT-E3210, GT-C5212i, GT-C3212; made lots of other improvements!
Octoplus/Octopus Box Samsung Software v1.5.3 Release Notes
- Added support for the following models:
- SM-N900A - added Unlock*, Repair IMEI**, Write Firmware, Read/Write/Repair NVM, Repair 3G/4G, Read/Write Security, Read/Write EFS, Reboot in Download/Recovery Mode.
- SM-N900T - added Unlock*, Repair IMEI**, Write Firmware, Read/Write/Repair NVM, Repair 3G/4G, Read/Write Security, Read/Write EFS, Reboot in Download/Recovery Mode.
- SM-N9005 - added Unlock*, Repair IMEI**, Write Firmware, Read/Write/Repair NVM, Repair 3G/4G, Read/Write Security, Read/Write EFS, Reboot in Download/Recovery Mode.
- SM-N900W8 - added Unlock*, Repair IMEI**, Repair 3G/4G.
- GT-C5212i - added Write Firmware.
- GT-C3212 - added Write Firmware.
- GT-E2250 - added Write Firmware.
- GT-E2252 - added Write Firmware.
- GT-E3210 - added Write Firmware.
- GT-C3300K, GT-C3300D, GT-C3300I, GT-C3300, GT-C3303I, GT-C3303K, GT-C3303, GT-C3322 - improved Write Firmware.
- GT-E2120, GT-E2120L, GT-E2120B - improved Write Firmware.
- GT-E2121, GT-E2121L, GT-E2121B - improved Write Firmware.
- All supported operations are described in details in Software manual ("Cable & Manual" button in Software).
Note:
* After perform Unlock operation for SM-N900A, SM-N900T, SM-N9005, SM-N900W8, IMEI will be set to service value "35750705000001/0".
** By performing Repair IMEI operation for SM-N900A, SM-N900T, SM-N9005, SM-N900W8, it is possible to repair IMEI to one of the service IMEIs from the list. Currently no solution, how to repair IMEI to original value.
Repair IMEI manual
- Root the phone manually.
- Connect the phone correctly:
2.1. Disconnect USB cable from phone.
2.2. Go to Menu->Settings->More->About Device.
2.3. Tap on "Build number" 7 times to enable developer options.
2.4. Go to Menu->Settings->More->Developer options.
2.5. Turn on "USB Debugging" option.
2.6. Go to phone dial window.
2.7. Type "*#0808#".
2.8. Select "DM+MODEM+ADB".
2.9. Press Home button.
2.10. Go to dial window again.
2.11. Type "*#9090#".
2.12. Set "Diag config" to "DM/DUM over HSIC" value.
2.13. Restart phone.
2.14. Press "Read Info" in software. - Select one of the Service IMEIs from the Software IMEI list.
- Press "IMEI A fix" button.
- Follow the software instructions (prompts).